Replacing a front grille is easier to plan when the replacement is compared with the vehicle before any panel is removed. Use this guide to confirm the three-piece configuration, identify what still needs verification, and plan a clean handoff to your installer.
Quick Answer
For a 2019–2025 Chevy Malibu, the Merton listing is a three-piece front grille set: upper, inner, and lower. It is listed as black and chrome plastic, without sensor holes, with OE references 84473374, 84565840, and 84338683. Before replacement, compare the original grille and front-end condition, confirm the sensor configuration, and use the vehicle or service information for any model-specific removal or post-repair procedure.
Confirm the Replacement Before Removal
- Year and model: 2019–2025 Chevrolet Malibu
- Layout: front upper, inner, and lower grille components
- Finish: black and chrome
- Material: plastic
- Sensor-hole configuration: no sensor holes
- OE references: 84473374, 84565840, and 84338683
Compare the product photos and package details with the original front end while the original parts are still available for inspection. If a number, opening, finish, or panel shape does not agree, stop and request fitment help.
Plan Around the Three Components
The set is listed as three separate pieces rather than one universal panel. Mark which original section is damaged and compare each replacement component with its matching location:
- Compare the upper/front grille with OE reference 84473374.
- Compare the inner grille with OE reference 84565840.
- Compare the lower grille with OE reference 84338683.
These references support identification, but the final check should include the physical shape, trim appearance, vehicle information, and any front-end equipment. Do not force a panel into place when the interfaces do not align.
Check Adjacent Front-End Parts
Before installation, inspect the bumper cover, visible supports, attachment areas, and surrounding trim for impact or deformation. A new grille may not sit correctly if an adjacent part remains damaged. If the bumper cover or support is displaced, have the full area assessed before treating the grille as an isolated replacement.
Confirm the No-Sensor-Hole Design
Merton lists this set without sensor holes. Compare the original grille and the vehicle's front-end equipment before removal. If a sensor or camera requires an opening or a specific mount, verify the correct part configuration first; do not add openings based on an image or guess.
Chevrolet's Malibu owner information notes that the front grille and area near the front camera are sensitive areas for driver-assistance functions. Keep them clean and follow the owner's information if a warning appears after repair. Any model-specific calibration or aiming requirement should be confirmed with the vehicle's service information or a qualified technician.
Use Verified Repair Information
This guide does not replace model-specific service instructions. Removal order, fastener locations, clips, tool sizes, torque values, and sensor procedures are not specified on the Merton product page. Use the appropriate Chevrolet service information or an experienced installer for those details. Chevrolet Accessories also recommends authorized dealer installation for its grille accessory instructions.
Post-Replacement Checks
- Confirm the upper, inner, and lower pieces sit in their intended locations without force.
- Check visible gaps and alignment against the surrounding bumper and trim.
- Confirm the black-and-chrome appearance matches the vehicle's intended finish.
- Keep the grille and nearby camera or sensor areas clean.
- Check for warning messages after the vehicle is reassembled; arrange a separate inspection if one appears.
See the current package details and product gallery on the Merton 2019–2025 Chevy Malibu grille product page.
Frequently Asked Questions
Is this a one-piece or three-piece replacement?
It is listed as a three-piece set: front grille, front inner grille, and front lower grille.
What should I verify before removing the original grille?
Verify the Malibu year and model, the three-piece layout, black-and-chrome finish, no-sensor-hole configuration, all three OE references, and the condition of adjacent front-end parts.
Does this guide provide the exact installation steps?
No. The product page does not specify fastener locations, tool sizes, torque values, removal order, or sensor procedures. Use Chevrolet service information or a qualified installer for model-specific details.
What if the vehicle has a front camera or sensor?
The listed set is without sensor holes. Confirm the required opening and mounting configuration before purchase, and follow the owner's or service information after front-end work.
What if the new grille does not align?
Do not force it. Recheck the application and the three OE references, then inspect the bumper cover, supports, and attachment areas for damage or displacement.