A Ford Edge bumper kit needs more than a year match. The front-end trim, daytime-running-lamp configuration, engine note, finish, and included pieces can all affect the purchase decision. Use this guide to compare the Merton kit with your vehicle before ordering.
Quick Answer
Merton lists this primed front bumper cover and grille assembly kit for 2011–2014 Ford Edge models, including Limited, SE, SEL, and Sport in the visible fitment table. The listing specifies a front kit without DRL and shows six package items: bumper cover, front grille assembly, lower bumper cover, bumper grille, and two brackets. Compare the original front end and OE references before purchase.
Fitment Snapshot
- Vehicle: 2011–2014 Ford Edge
- Visible trims: Limited, SE, SEL, Sport
- Visible engine notes: 3.5L V6 gas and 3.7L V6 gas
- Part: front bumper cover and grille assembly kit
- Position: front, upper, lower, left, and right
- DRL configuration: without DRL
- Finish/status: primed; not described as color-matched paint
- Material: polypropylene and metal
- Package: six listed items
Start With the Exact Edge Configuration
The Merton fitment table lists 2011, 2012, 2013, and 2014 Ford Edge models and names Limited, SE, SEL, and Sport. It also shows 3.5L V6 gas and 3.7L V6 gas in the visible engine column. If your Edge has a different engine, a special front-end package, or an unlisted modification, request fitment verification before ordering.
Ford's official parts catalog recommends using the VIN for the most accurate parts search. Use the Ford Parts catalog search guidance as an additional check, while treating the Merton product page as the source for this aftermarket kit's package contents.
Confirm the No-DRL Configuration
The product details describe this kit as fitting a Ford Edge without DRL. Compare the front lighting and bumper openings on your vehicle with the product photos. Do not assume a similar model-year bumper has the same lamp openings or front-end layout.
Ford's owner information explains that daytime running lamps are a vehicle lighting function. If your Edge has a different lamp configuration or front-end option, verify the correct bumper and grille application before purchase rather than adding openings to a primed replacement.
Review the Six Listed Package Items
| Listed item | OE reference shown by Merton | Purchase check |
|---|---|---|
| 1 bumper cover | BT4Z-17D957-BPTM | Compare the overall front bumper shape and finish status |
| 1 front grille assembly | BT4Z-8A284-B / BT4Z-8200-A / BT4Z-8200-C / BT4Z-8200-D | Compare grille pattern, trim, and original labels |
| 1 lower bumper cover | BT4Z-8200-E | Compare lower opening and surrounding bumper layout |
| 1 bumper grille | BT4Z-17K945-A | Compare the smaller grille location and shape |
| 2 brackets | BT4Z-17C947-A and BT4Z-17C947-B | Compare the left/right bracket positions and visible mounting area |
These are the OE references listed on the Merton page for this package. Use them with the vehicle record, original front-end shape, and product photos. A reference number alone should not override a visible trim or DRL mismatch.
Understand the Primed Finish and Packaging Note
Merton describes the front bumper kit as primed. The page does not state a final paint color or color-match service, so confirm finishing requirements with the installer or body shop before ordering. The page also notes that products are delivered folded; inspect the package and the parts after unpacking and follow the seller's handling guidance if any issue is found.
Before You Order
- Confirm 2011–2014 Ford Edge and the listed Limited, SE, SEL, or Sport trim.
- Compare your engine and front-end configuration with the visible Merton fitment table.
- Confirm that your vehicle does not require DRL openings in this bumper configuration.
- Compare the primed finish with your plan for final finishing.
- Review all six package items and the OE references.
- Confirm any hardware or installation detail not explicitly listed on the product page.
For the current price, product gallery, package information, and fitment support, visit the Merton 2011–2014 Ford Edge front bumper and grille kit.
Frequently Asked Questions
What Ford Edge years are listed for this kit?
Merton lists 2011, 2012, 2013, and 2014 Ford Edge models. The visible fitment table names Limited, SE, SEL, and Sport.
Is this kit for a Ford Edge with DRL?
No. The product details describe the kit as without DRL. Compare your vehicle's front lighting and bumper openings before ordering.
How many items are included?
The package field lists six items: a bumper cover, front grille assembly, lower bumper cover, bumper grille, and two brackets.
Is the bumper cover already painted?
Merton lists it as primed and does not state a final paint color or color-match service. Confirm finishing requirements with your installer or body shop.
Which OE references should I compare?
Merton lists BT4Z-17D957-BPTM, BT4Z-8A284-B, BT4Z-8200-A, BT4Z-8200-C, BT4Z-8200-D, BT4Z-8200-E, BT4Z-17K945-A, BT4Z-17C947-A, and BT4Z-17C947-B. Compare them with the original parts and vehicle configuration.